How to fix the Anti-theft portable Alarm to your goods

First of all, let's take a look at the accessories provided with the Anti-theft portable alarm system.
There is a plastic tie, one H type support, two 2 studs flat supports, one double side tape, four screws. The 2 studs flat support can be screwed to the H type support to form an assembly in which you can pass a plastic tie through. The 2 studs flat support can also be screw to any flat surface.



In the next picture, you can see that the H type support provided have been screwed to one of the two plastic 2 studs supports to form an assembly. You also see that you can insert a plastic tie inside this assembly allowing you to tie this assembly to anything. This assembly will allow you to transfer your system from one goods from another. In the second picture, you can see the double side tape stick to the 2 studs support.

   

This picture is showing you an example of what you can do with these provided supports. You can transfer your Anti-theft & Personal portable alarm system from your laptop cover to your laptop carrying case for a better protection during your trips. So you install the (H type + 2 studs supports) assembly to your laptop carrying case handle and you install (stick) the second 2 studs plastic support provided to the back of your laptop cover. All you have to do is to insert in ZIG ZAG your Anti-theft & Personal portable alarm system on the 2 studs support from your laptop when you are working…. to your carrying case when you are moving.




You may install the support assembly of your system on any bag or luggage handle.



You will discover that you can fix your system to the support assembly by sliding and zigzagging down the studs into the back cover sluts. It is not easy to do the first time, but I wanted it that way to force movement on the system for detection purpose.



Now, let's take a look at the back cover of the Anti-theft & Personal portable alarm system. Once you pushed the protection tab from outside, you can see all the possibilities provided with my special design. This protection tab prevent dust, mud and water to penetrate inside the system. It is important to put it back in place.




- You can see 3 sets of 2 slots, two at each end and one in the middle of the back cover. These slots are giving you the chance to introduce a plastic tie through and across the cover. The one in the center is larger to allow you to introduce a metallic hose clamp through the cover if you whish to.

- You can see 1 set of 2 slots in the middle and along the cover to introduce a plastic tie through and along the cover.

- You can see one S and one Z slot in the middle of the cover to introduce and slide in zig zag the 2 studs of two plastic supports that I am providing you with, giving you the chance to install and remove the system from one goods to another at your convenience.

- You can see two oval holes at each end of the back cover allowing you to screw the back cover directly to the 2 bike's accessory screws available on every bike tubing frame.




Here is a picture of 3 different ways to insert a plastic tie through and across the cover of the Anti-theft & Personal portable alarm system, in order to fix it to a bike tubing, a bag's handle or anything else.




Here is a picture of a metallic hose clamp passing through and across the back cover of the Anti-theft & Personal portable alarm system.




Here is a picture of the Anti-theft & Personal portable alarm system back cover installed directly on the accessory screws of a bike.




These pictures are showing you how the system is then fix to the back cover already screwed to the bike's frame and then screwed to the system back cover.

   


This picture is showing you how the Anti-theft & Personal portable alarm system can be slide down in zig zag into the 2 studs support already screwed (or stick) to my door's shed. Since the system cannot be removed without zigzaging and moving, once armed it cannot be remove without emitting a sound . It will detect the movement and trigger the double siren.




You can also insert a plastic tie along the back cover of the Anti-theft & Personal portable alarm system.